Hello all, new guy here. I have a Fly Capri Turbo, and im installing the slot.it light kit.
BEFORE DRIVING AFTER PRERUNNER LIGHT INSTALLATION. Separate the grommet from the LED light on the harness and pass both the grommet and light through the hole in the 2nd grill slot. (FIG17) Push the grommet into the hole in the grill insert. (FIG18) Push the LED light into the grommet to seat the light into the grill insert. To install the awning light kit part # A30-0625VP you have to install it in the utility slot of an RV awning. For that we have the part # A30-0600 which is an 18 foot track that comes in 3 foot sections if that is too long. View full answer. Nov 30, 2018 The Gocycle Integrated Light kit includes a front light, rear light and mounting brackets. To install the front light bracket; First remove the mudguard bolts using a 4mm hex key. Remove the two 3mm hex head bolt bolts from the cap. Only lift the fork boot as shown in the video. The Front light cable fits in the slot in the bracket.
I have a couple questions. The two wires off the circuit are both red. Which is which and where do I run them?To the motor, or
Fire And Light Slot Machine
to the wires on the slot guide?Looks like this chassis was built with an option to mount headlights since the predrilled holes line right up. I will have to grind
away some of the interior around the driveshaft tunnel to fit the circut board. Such a pretty car, hate to do it...but these lights should look great!
thanks for the help,
MJACK
